Civil Engineering Guide

Cement mortar is aggregate of cement sand & water used as adhesive or binding material for bricklaying. What is thickness of cement mortar in brickwork?, power of brickwork relies upon on mortar thickness. Thickness of cement mortar in brickwork is set zero.Four″ to zero.Five″ or 10 mm is being used. More than 0.Five″ thickness of mortar cement lessen the strength of brick wall so it may not be used. For brick calculation we ought to apply handiest cement mortar thickness of 0.Four″ to zero.5″ or 10 mm in brickwork. More than zero. Four″ to 0.5″ and much less than lower the strength of brick wall.

One thing of brickwork which regularly reasons confusion is estimating what number of bricks or blocks could be required for a brick wall making these estimates in all fairness uncomplicated using only a few figures.

Brick calculation for a wall is calculated with addition of wastage of brick. First the range of bricks/blocks for the overall wall is calculated, then the extra quantity of bricks for any brick wall. These civil information are delivered together and then a ten% allowance have to be added for wastage and breakages.

10 inch brick wall calculation, first we know approximately brick length in india is nine.5″ x four.5″ x 3.5″, the mortar joints used are generally about zero.4″ each horizontally and vertically.

10 inch brick wall calculation and their estimate

To calculate bricks in 10 inch wall, you need to not the measurement of the wall. For instance, if a wall is 10 toes long with 10 feet peak and 10 inches thickness. Then we can find its bricks in a following methods. Multiply dimensions of wall inclusive of 10 toes × 10 feet × 0.83 ft. We will get eighty three cubic feet. As thirteen.5 nos general bricks in 1 cuft, then range of bricks = 83.Three × thirteen.5 = 1125 bricks.

Suppose you have a brick wall of 10×10 squareft of 10 inches thick by using double layer of brick wall.

● number of bricks required = volume of brick wall ÷ extent of 1 brick with mortar, you have got given quantity of brick wall is 83.3 cuft and quantity of 1 brick with mortar which include (10″ × 5″ × three.5″) ÷ 1728 = 0.10 cubic feet, so range of bricks in 10 inch wall = eighty three.Three ÷ zero.10 = 833 nos.

● price of bricks:- if brick rate is Rs eight in step with pieces, then price of 833 bricks which include 833 × eight = Rs 6664.

● quantity of mortar needed = (extent of 10″ brick wall – extent of 833 bricks) × 1.33, quantity of 10″ wall = 83.33 cuft, volume of 833 bricks = 9.Five″×four.5″×three″ × 833 = 62 cuft, for this reason amount of mortar wished = (eighty three.3 _ 61.83) × 1.33 = 28.56 cuft.

● cement to sand ratio:- recall a widespread cement to sand ratio is 1:6 (1 part of cement mix to six elements of sand) wished for mortar training for bricklaying. Total proportion = 1+6 = 7, parts of cement = 1/7 and elements of sand = 6/7.