Hoffman Lamson Blower Services USA

Unlike the high volume low pressure blower fan, High pressure blower does not pressurize or sustain a given pressure within a closed or sealed environment and are designed to pull in or push out large volumes of air. These types of volume blowers are designed to function within a low static pressure environment, and do not perform well in medium to high static locations.

In industrial settings and large-scale commercial settings, high pressure blowers are widely used. In large buildings ventilation systems require complex systems of blowers and ductwork to ensure adequate air circulation. In industrial settings effective ventilation systems are especially important where harmful or unpleasant gasses can build up.

General centrifugal fan have annular impeller, while the low-pressure centrifugal fan is the impeller of the centrifugal fan. Low-pressure centrifugal fan converts electric energy into potential energy. It uses high-speed winding impeller to stop gas as medium-pressure fan, and realizes the whole working process.

Centrifugal blowers and Axial fans come in low, medium and high pressures. Centrifugal fans can generate much more pressure at the same rotational speed due to their creation of a “churning” perpendicular air flow, instead of the linear axial flow. Direct driven blowers compared to belt driven fans can always generate a higher pressure because no power is wasted between the motor and the blower, as there are no intermediary devices.

Aquaculture, Cement Plants, Flue Gas Desulfurization, Food and Beverage, Non-Woven Textiles, Petroleum Refining, Petroleum Refining, Wastewater Treatment are some of the industries using low pressure blowers.Pumps are used to move liquid substances through a mechanical action. Pumps are mainly divided into three types based on the methods used by pumps to move the fluid.

The three types are direct lift, displacement, and gravity methods. Pumps usually operate by reciprocating or rotating mechanisms, and consume energy to perform mechanical work that moves the fluid. The mechanical industrial pumps can also be submerged in the fluid pumped by the pumps or placed outside the fluid. The pumps can be divided into positive displacement pumps, impulse pumps, velocity pumps, gravity pumps, steam pumps, and valve-less pumps according to its displacement method. In addition, there are two basic types of pumps, namely positive displacement pumps and centrifugal pumps.

 Some of the key players operating in the global industrial blowers market are Gardner Denver Inc., Hoffman & Lamson, SPX and others. While in pumps Nash, Gardner Denver, Hoffman & Lamson, Sutorbilt, and Roots among others contribute to the major share in the market.

We rebuild all types of pumps and blowers to bring its operation back to OEM specifications. The technicians have been factory trained in the process of vacuum pump repair. After the repair or remanufacturing process is complete, each item is system tested to ensure proper operation, OEM specification verification, and extended operation under load and also with stocks of spares to support older or obsolete equipment which OEM no longer supports. We use only OEM parts for repairs to ensure the highest quality of work and extend the life of your equipment. You can repair, rebuild, or exchange your pump with our replace program.

Please contact us for all your requirements on blowers or pumps call us (713) 360 6995 or mail us at [email protected]. We are based in Houston, Texas