Why Bathtub Reglazing Springfield MA Is A Better Option Than Tub Replacement

If your bathtub has mineral deposits, chips or cracks and you do not want to carry out a major bath renovation project, tub reglazing can be a good alternative to replacing the tub. This process involves restoring an old, worn out tub back to its original shine. Bathtub refinishing can be completed in about four to five hours. By opting for bathtub reglazing Springfield MA inhabitants can save time and money.

Unlike replacing your bathtub, tub refinishing is cost effective. You can save as much as eighty percent of the cost of replacing a tub. You can use these savings to improve the appearance of other important fixtures such as vanities, sinks and lights.

By choosing to refinish your tub, you will also not have to complete the many difficult tasks associated with replacing bathtubs. Older bathtubs are usually constructed with heavier materials that are hard to remove and carry. In addition, it is often necessary to remove the tiles around a tub before you can replace it. If your bathtub is in good working condition, replacing it is not necessary.

After deciding to reglaze a bathtub, consumers may choose a color that can complement the decor of their bathroom. They can choose from a wide variety of colors to make the room look unique. By reglazing their tub, homeowners will also contribute to environmental conservation efforts because it is not necessary to dispose their old tub in a landfill. After a tub is reglazed, consumers can use it for 15 or more years. If any cracks or chips develop over time, they can be fixed quickly.

It is wise for homeowners to enlist the services of a professional refinishing contractor when reglazing their tub. In order to refinish a tub, contractors start by cleaning the entire tub with special industrial cleaners. Some products are designed to cause the original surface of the bathtub to undergo chemical decomposition in order to prepare it for a new finish. The cleansing process removes contaminants like dirt, soap scum and dyes. After this, the contractor prepares the pipes and drains for the reglazing process.

The bathtub reglazing contractor will then remove the old caulk line of your tub. He or she will then fix any pits, chips and other imperfections on the surface of your bathtub using special products. After this, the contractor will mask off the bathroom to safeguard the surfaces that do not need to be resurfaced and to reduce dust to ensure that the refinished surface will be pristine.

Tub refinishing contractors also shut off and mask the air registers and dampers. They also set up ventilators and special lights. After this, they apply the new surface of the tub in three phases, which include surface preparation, bonding or priming and applying the top coat.

After applying a new tub surface, the refinishing contractors will examine the surface. Cure times for the refinishing products used differ, depending on the kind of system used. Ideally, the surface of the tub should remain dry for twenty four hours after the refining process. Hardware such as faucets, drains and handles should be installed after 24 hours. After the refinishing process is complete, your bathtub will appear as attractive as it did the day it was installed.

Get a review of the benefits of using tub refinishing Springfield MA services and more info about a reliable service provider at http://www.refinishingwizards.com now.